The sewage system is quite important for a house. The most common issue faced by the homeowners always is damaged in the pipe systems. The entire pipeline system has to be changed when there are severe damages. The repairing process is more time consuming and needs more investments. The homeowners need not worry about the repairing expenses and time as the technology has made it easy by inventing new methods for repairing the drain line system. The task is done smoothly by xtreampipe.se
The process followed for relining: Modern technology has made it easy for repairing sewer pipeline. The new method has been introduced for repairing the pipeline and the method involves pipe relining as well. However the technology being new, many are unaware of the fact of the relining process and are essential to know how the process works.
Examining the drainpipe line:
While performing the relining process instead of just doing the relining directly it is better to inspect the damaged pipeline. The validation will provide an accurate status of the pipeline. The inspection clearly states whether there is a requirement for relining or not. The examination will provide a clear picture of the damage in the pipeline and whether the pipe is clotted or any accumulations are present. Modern technology has enabled to use pipe camera to check the actual condition of the host pipeline. The condition of the pipe can be viewed through photos, record and footages. The inner layer of the pipe will be clearly visible.
Maintain the pipeline clean: It is tough to judge whether the host pipe is clean and clear as the new one. Under such circumstances, it is better to clean and clear the pipeline. Equipment must be used for cleaning purposes. Hydro Jetter makes this task easy. The equipment releases high water pressure to clean the interior walls of the pipe. The accumulations, grease and other wastes will be cleaned easily. Even cutters are used to cut the build-ups and hydro Jetter is used in removing the pieces.
Validate the condition of the pipe: It is vital to check the condition of the pipe before going for relining. It is actually required to know whether the pipe is actually ready for relining purpose. The camera has to be sent again to check whether the cleaning is done perfectly without any accumulations. The accumulations present can be cleaned making the pipe ready for relining.
Lining preparations: After confirming that the pipe is ready for relining it is important to prepare the lining for the pipe. The resin mix and the hardening agent must be combined in proper order. The lining mixture must be mixed carefully as specified and ensure that the lining mixture is efficient enough to repair the damage of the pipe. After preparing the lining mixture the pipelining must be inserted into the pipe. The drum can be used to blow the lining into the pipe. The compressor is used to push the lining to the host pipe. After pushing the lining into the pipeline wait for a while to enable the resin to form the protective layer around the pipe. The lining is done for the interior walls and the full length of the pipe. After lining the junctions and inspection pits must be removed to prevent water behind the lining.